A check before operation, generator

1, check the oil

Remove the oil filling flap, check the oil oil level;Oil should be kept near the high scale, check, if you need to be added.Note to add the same brand, same model oil.If the oil dirty, should be given to replace;The oil level should choose SD (API), it is recommended to use SAE10W / 40 1130 mobil oil.

2, check the fuel

Check the fuel level from the fuel gauge, if the oil level is low the vehicle will be listed 90 or 93 unleaded gasoline, the fuel oil mouth neck be sure to use the fuel filter.Warning: generator, do not come on when hot;The oil switch is shut before refueling;Don't let the dust and water into fuel, etc;Before the start of wipe up spills fuel;Stay away from the fire.

3, check each part

Fuel hose and whether there is a leak?

If there's any loose for the bolt and nut?

The parts with and without damage or broken?

If there's any loose for the battery and the control wire end?

Check around 4, generators

Presence of flammable or other dangerous goods;Generator distance should be child around 1 m;Should be in a dry, well ventilated place to run generators.Warning: the exhaust pipe should be far away from the external things;Generator away from open flame;The generator should be placed on level stable plane;Don't use paper shade the generator vents or other items.

Second, start the generator

Put the generator switch at "ON" position.Open the fuel switch;Will choke valve switch in "off", a heat engine doesn't have to;Gently pull start handle to feel resistance, pull in quickly.Don't pull the line all.If not, again and again will choke on "open" to try again;The generator starts, will return to "on" the choke lever gradually;Preheat generator no-load running for a few minutes.

Third, on load

Check the meter or indicator to confirm the unit normal;Before load connected generators disconnect switch with electrical equipment, and confirm the load with the mains network disconnection;Insert the plug of equipment unit socket or connect the panel unit connected devices again;Check whether the air switch ON the unit is in the "ON" position;Close the switch equipment, equipment normal use.Warning: the unit does not allow overloading!

Fourth, the oil sensor

The oil in the crankcase oil level can be detected, when the oil level is lower than the safety limit, generator automatically stop, protection;Suddenly stop from time to time when the generator fuel normal please check the oil level.Under normal circumstances can't start the generator, please check the oil level.

Five, the unloading

Disconnect the generator load switch, or from the generator outlet pull out the power cord plugs;Before stop, let the generator no-load running for 3 to 5 minutes to make its cooling;Will STOP the generator switch in the "STOP" position, STOP;Warning: it is forbidden to go back to the generator, electric, otherwise it will cause the generator destroyed!Suggestion: first to disconnect the generator load switch, shut off the oil valve, let the generator will be fuel used up and down, the tubing will STOP switch in the "STOP" position.